|
Below are the specifications straight from Creative's website.
Technical Specs
- 24-bit Analog-to-Digital conversion of analog inputs at 96kHz sample rate
- 24-bit Digital-to-Analog conversion of digital sources at 96kHz to analog 7.1 speaker output
- 24-bit Digital-to-Analog conversion of stereo digital sources at 192kHz to stereo output
- 16-bit to 24-bit recording sampling rates: 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz
- ASIO 2.0 support at 16-bit/44.1kHz, 16-bit/48kHz, 24-bit/44.1kHz 24-bit/48kHz and 24-bit/96kHz with direct monitoring
- Enhanced SoundFont support at up to 24-bit resolution
Audio Performance (Rated Output @ 2Vrms)
- Signal-to-Noise Ratio (20kHz Low-pass filter, A-Weighted)
- Stereo Output: 109dB
- Front and Rear Channels: 109dB
- Center, Subwoofer and Side Channels: 109dB
- Total Harmonic Distortion + Noise at 1kHz (20kHz Low-pass filter) = 0.004%
- Frequency Response (-3dB, 24-bit/96kHz input ) = <10Hz to 46kHz
- Frequency Response (-3dB, 24-bit/192kHz input) = <10Hz to 88kHz (Stereo only)
Connectivity
- FlexiJack (Performing a 3-in-1 function, Digital Out / Line In / Microphone) via 3.50 mm minijack
- Line level out (Front / Rear / Center / Subwoofer / Rear Center) via 3.50 mm minijacks
- AUX_IN line-level analog input via 4-pin Molex connector on card
- One AD_Link (26 pin) connector for linking to the X-Fi I/O Console (Upgrade option)
Below are four screen shots taken while testing the card with RMAA v5.5(Right Mark Audio Analyzer).
While I am not a big fan of these test and graphs, some people are, so here you go.
Click on the images below for a larger view
|
