|
The front of the case has room for two 80 mm intake fans to bring
cool air into the case and push it right across your hard drives.
As everyone should know, today's 7,200 and the new 10,000 rpm
Raptor drives throw off a lot of heat. Without these fans blowing
across your drives you better back up your data often, because
your drives life expectancy will be shortened drastically if your
house is hot all the time.
The case again has room for four 5 ½ inch drives, two
3 ½ inch drives exposed and four 3 ½ hidden drive
bays. There is plenty of room for your CD Rom, DVD player, CD
Burner, a couple of hard drives or what ever else you can think
of to put in the bays. You will also notice there are plenty of
screws included with this case. With so many screws and no drive
clips, get your screw driver handy, you will need it.
This funky looking picture is of the front wiring harness for
the LCD readout. The bottom of the picture is the front USB/ Audio
ports wiring harness. In the top and bottom corners of this picture,
if you look really close, you can see four of the wires going
into the six LEDs that light up the tower at night.
You definitely know that through SEO, your business will benefit hugely, so you have to make sure to find the right Link Building Company that can help you gain your goals SEO on lookup motor rankings, finding the best Link Building Company for your business is a lot more crucial than ever. Link building Company will help you | Simple Website Templates. Every great website and web design needs a starting place or point. Our own newly redesigned website started from a basic template that was heavily modified to suit our needs and the same can be done for you. Using our simple sea website templates on our site you can buy website templates Here is a photo of the backside of the motherboard tray and a
closeup of the power switch wiring harness. There is nothing special
to see here but I wanted to give you an overall view of the tower.
One thing to say about the wiring harness though is that it has
everything that you need to power up the front LED readout. There
are no directions included for hooking any of wiring harnesses
up, but it was very easy to figure out.
|