Today I am reviewing Foxconn's newest nForce4 Ultra motherboard, the Winfast NF4UK8AA. This motherboard is the least expensive nForce4 Ultra motherboard on the market. During this review, I am going to assume you already know about the nForce4 Ultra chipset, in case you don't please read about the chipset in my review on the BFG VNF4 motherboard.

Click here to read BFG nForce4 review

Here are the specifications list direct from the manufacturers website.

• Processor AMD Athlon™ 64/Athlon 64 FX, Socket 939 (939-pin), 1600/2000MT/s
• Chipset NVIDIA nForce4 (CK8-04) Ultra
• Memory Dual channel, unbuffered, 2.5V DDR266/333/400, (4) 184-pin DIMM sockets, max 4GB
• Graphics Discrete (non-integrated) - use expansion slot
• Expansion Slots 1 x PCI Express x16, 2 x PCI Express x1, 4 x PCI
• IDE/ATA Support 2 x ATA/133 + 4 x SATA/300 (w/ RAID)Supports RAID 0, 1, and 1+0; cross-controller (IDE & SATA)
• Audio Integrated, 7.1 channel AC97 (Realtek)
• LAN Integrated Gigabit Ethernet (10/100/1000) MAC + PHY (Vitesse)
• IEEE-1394 2; 1 x 6-pin in rear I/O area + 1 front via internal header; 1394a
• USB Up to 8; 4 in rear I/O area + 2 internal 2-port headers; ver. 2.0
• Rear I/O Ports 1 x PS/2 keyboard1 x PS/2 mouse1 x RJ45 (LAN)4 x USB 2.01 x line-in/line-out/mic (audio)1 x parallel (SPP/ECP/EPP)1 x COM (16550-compatible UART)Additional line-outs for 7.1 channel audio1 x IEEE-13941 x S/PDIF (coax out)2 or 4 ports USB 2.0 via cable/bracket from internal headers (shared w/ front)
• Internal Connectors/Headers 1 x floppy disk driveFront audio header1 x S/PDIF (coax out) header2 x USB 2-port headers, ver. 2.01 x IEEE-1394 header
• BIOS 4Mb flash EEPROM w/ LAN boot, PnP, ACPI, WfM, DMI 2.0,
• Special Features Wake-on-LAN (WOL), suspend-to-RAM (STR, S3), suspend-to-disk (STD, S4), SuperUtilities - SuperBoot, SuperBIOS-Protect, SuperRecovery, SuperSpeed, SuperStep, SuperLogo, and SuperUpdate
• Overclocking Features Adjustable bus speedsAdjustable memory timingAdjustable voltages (may be Vcore only)
• Accessories Support CD, user's manual (or installation guide), rear I/O shield, 1 x floppy drive cable, 1 x HDD/ODD drive cable (supports UDMA/ATA 33/66/100/133 drives)RAID driver on floppy disk(s)4 x SATA data cables, 2 x SATA power cable (each supports 2 drives),1 extra HDD/ODD drive cable (supports UDMA/ATA 33/66/100/133 drives)Rear cable/bracket assembly w/ 2 x USB 2.0 portsProcessor heat sink retention mechanism
• Form Factor ATX, 12'' x 9.6'' or smaller - see User's Manual

Source:Foxxconn's Website